Before ordering replacement sunglass lenses, identify the exact frame model rather than relying on the frame’s shape or brand name alone. The most useful information is usually printed or engraved on the inside of one of the temple arms. Look for a brand name, a model name or code, and a separate group of size numbers.
The model code identifies the frame family. Size markings describe dimensions and can distinguish one size from another within the same family. For replacement lenses, both can matter. A lens made for a similar-looking frame can still have a different outline, bevel, vent pattern, tab or mounting profile.
Start With Both Temple Arms
Open the sunglasses under bright light and inspect the inside of both arms.
Manufacturers do not all use the same marking layout. You may find:
- Brand name or logo
- Model name
- Model or style code
- Color code
- Lens width
- Bridge width
- Temple length
- Manufacturing or certification markings
Do not assume every number is the model number.
A useful first step is to photograph both temple arms before trying to interpret the text. Markings can be small, faded or partly hidden by wear, and a phone photo lets you zoom in without repeatedly flexing the frame.
How to Tell the Model Code From the Size Numbers
A model code often contains a brand-specific combination of letters and numbers. Size markings are more likely to appear as a group of measurements.
For example, an EBJDE product may be listed as compatible with a frame identified by a code such as OO9014. That code is the model reference used to match the lens listing.
A separate size string might contain values that represent lens width, bridge width and temple length. The exact format varies by manufacturer, so treat the numbers as measurements rather than assuming they identify the frame by themselves.
The key rule is:
Do not replace a model code with a size measurement, and do not replace a size check with the model code.
When both are available, use both.
Why the Brand Name Is Not Enough
Many eyewear brands sell multiple frames with very similar styling.
Two rectangular wrap sunglasses from the same brand may use different:
- Lens outlines
- Lens curvature
- Edge bevels
- Retaining tabs
- Vents
- Shield shapes
- Frame grooves
- Lens dimensions
That is why a search for “replacement lenses for \[brand\] sunglasses” is only the beginning. You need the exact model or style reference before selecting a model-specific replacement lens.
The EBJDE Replacement Sunglass Lenses collection is organized around compatible models for this reason.
Read the Full Code, Not Just the First Few Characters
If the frame shows a code, copy the entire visible reference.
A partial model name can lead to the wrong product because closely related frame families may have:
- Standard and XL versions
- Low-bridge versions
- Different generations
- Different lens widths
- Sport and lifestyle variants
- Vented and non-vented lens versions
For example, EBJDE carries separate replacement-lens listings for different Oakley model codes within related families. Similar product names do not make the lenses interchangeable.
When you type a code into a search field, include every letter and number you can read.
What If the Frame Has a Model Name but No Clear Code?
A model name is useful, but confirm it with dimensions and the physical lens shape before ordering.
Compare:
- The complete model name.
- Any size markings.
- The visible lens outline.
- Vents, tabs, notches or cutouts.
- Whether the frame uses two separate lenses or a shield lens.
- The way the lens edge sits inside the frame.
If the product page shows a model code that your frame does not show, do not assume the name alone is enough. Ask for compatibility help.
What If the Markings Have Worn Off?
Do not guess from appearance alone.
Instead, collect identification evidence:
- Front photo of the entire frame
- Side photo of each temple
- Close-up of both hinges
- Close-up of any remaining markings
- Straight-on photo of the lens shape
- Lens width measurement at the widest practical horizontal point
- Overall frame width if useful
- Photos of vents, tabs or unusual mounting features
A seller or optician may be able to narrow down the frame from these details, but physical similarity is still not the same as a confirmed model match.
If the identification remains uncertain, it is safer not to order a model-specific lens.
Lens Width Is Useful, but It Does Not Define the Lens Shape
A common mistake is choosing a replacement only because the listed width seems correct.
Two lenses can share a similar maximum width while having different:
- Top-edge shapes
- Lower curves
- Corner radii
- Bevel positions
- Wrap curvature
- Tabs or locking points
Lens width is a confirmation measurement, not a complete compatibility test.
Use it after you identify the model, not instead of identifying the model.
Check for Size Variants Within the Same Model
Some frame models are produced in more than one size.
If the same model name appears with multiple lens widths, the lenses may not be interchangeable. A few millimeters can change the entire perimeter enough that a lens will not seat correctly.
Before checkout:
- Match the model code.
- Match the listed size where the product requires one.
- Compare the lens outline with the product image.
- Review any model-specific fit notes.
If the product listing says “54 mm” and your frame marking shows a different lens width, stop and investigate before ordering.
Distinguish Model Numbers From Color Codes
Some frames include a separate color or finish code beside the model reference.
That code can matter for identifying the exact original frame, but it does not necessarily change lens geometry. The important point is not to mistake a color code for the frame model.
If a product listing uses a particular model code but your frame shows several groups of letters and numbers, search the full marking or compare it with the manufacturer’s naming pattern before choosing a lens.
Use the Existing Lens as a Second Compatibility Check
Even after the model number looks correct, compare the physical lens.
Check:
- Overall outline
- Left/right orientation
- Vent pattern
- Edge notches
- Mounting tabs
- Bevel location
- Shield vs two-lens construction
The old lens can reveal a mismatch that the printed code did not make obvious, especially on frames that have been repaired, mixed with replacement parts or produced in multiple variants.
Do Not Force a Lens to Prove Compatibility
Installation pressure is not a valid compatibility test.
If a replacement lens requires abnormal bending, leaves an obvious gap, will not engage the retaining points, or visibly distorts the frame, stop. Recheck the model and size.
A correct model match can still require controlled installation technique, but forcing a visibly mismatched lens can damage the lens edge or frame.
For installation guidance after compatibility is confirmed, see How to Replace Sunglass Lenses Safely.
Example: Model-Specific EBJDE Listings
EBJDE uses exact model references on compatible aftermarket replacement-lens listings.
Examples include products described as compatible with:
- Oakley Gascan OO9014
- Oakley Sutro OO9406
- Oakley Flak 2.0 OO9295
The brand and model references are used to identify compatibility. EBJDE aftermarket replacement lenses are not represented as original manufacturer or OEM lenses unless explicitly stated.
If your frame carries a different code, do not choose one of these lenses simply because the frame looks similar.
A Simple Pre-Order Identification Checklist
Before buying a model-specific replacement lens, confirm:
- Brand: Do you know the frame manufacturer or brand?
- Full model code: Have you copied every visible character?
- Size: Does the relevant lens-width or frame-size marking match?
- Lens outline: Does the old lens match the product photos?
- Mounting features: Do vents, tabs and edge details match?
- Frame condition: Is the frame intact enough to accept a new lens?
- Uncertainty: If anything is unclear, have you asked for fit help before checkout?
This checklist is more reliable than choosing by color, style name or visual resemblance alone.
FAQ
Where is the sunglass model number usually located?
Often on the inside of a temple arm, but the exact location varies. Check both arms and any other manufacturer markings on the frame.
Is the number next to a square symbol the model number?
Usually that group is part of the frame-size information rather than the model code. Marking formats vary, so read the entire set of inscriptions before deciding.
Can I order replacement lenses using lens width only?
No. Width does not capture the complete lens shape, bevel, curvature or mounting features.
What if my sunglasses have no readable model number?
Photograph the frame from multiple angles, record any remaining markings and measurements, and ask for compatibility help. Do not rely on appearance alone.
Are two sizes of the same model interchangeable?
Do not assume so. If a model is sold in multiple sizes, each size can use a different lens perimeter.
Do I need the color code to buy replacement lenses?
Usually the frame model and required size are more important for physical fit, but keep the color code as part of the full identification record because manufacturer naming systems vary.
Can I use a lens from a similar-looking model?
Not safely without verified compatibility. Similar-looking frames can use different lens shapes and mounting systems.
Identify First, Choose Lens Features Second
Lens color, polarization, photochromic options and mirrored finishes matter only after you know which lens physically fits the frame.
Start by reading the complete markings on both temple arms, separate the frame model from the size information, and compare the original lens shape with the product page. If any part of the identification is uncertain, ask before ordering rather than trying to make a near-match fit.
Browse EBJDE Replacement Sunglass Lenses after you confirm the model, and use the Ultimate Guide to Sunglass Replacement Lenses to compare lens types and installation paths.
Recommended Eyewear Accessories
Metal Replacement Temple Arms for Eyeglasses | EBJDE - Black
- $9.99
- Unit price
- / per
-
Black
-
Coffee
-
Gold
-
Silver
- BlueRose GoldGun
Soft Eyeglass Ear Cushions & Anti-Slip Temple Sleeves | EBJDE - Black, 3-Pack
- $9.99
$15.99- $9.99
- Unit price
- / per
-
Black, 3-Pack
-
Pink, 3-Pack
-
Gray, 3-Pack
-
Purple, 3-Pack
- Dark Blue, 3-PackBrown, 3-PackBlack / Pink / Purple, 2-PackBlack / Brown / Gray, 2-PackBlack / Blue / Gray, 2-Pack
1mm Silicone Eyeglass Temple End Tips for Thin Metal Frames – 5 Pieces | EBJDE - Black, 5-Pack
- $9.99
- Unit price
- / per
-
Black, 5-Pack
-
White, 5-Pack
-
Brown, 5-Pack
-
Blue, 5-Pack
- Red, 5-PackPurple, 5-Pack
Silicone Push-In Replacement Nose Pads Compatible with Nike Eyeglasses | EBJDE - Black, 5 Pairs
- $9.99
- Unit price
- / per
-
Black, 5 Pairs
-
Gray, 5 Pairs
-
White, 5 Pairs
Long Silicone Temple-Tip Covers for Thin Metal Frames - Black
- $9.98
- Unit price
- / per
-
Black
-
White
-
Pink
-
Gray
- Light PurpleSky BlueOff-White
2×1mm Silicone Temple End Tips for Thin Metal Eyeglasses, 5-Pack | EBJDE - Black, 5-Pack
- $9.99
- Unit price
- / per
-
Black, 5-Pack
-
White, 5-Pack
-
Blue, 5-Pack
-
Brown, 5-Pack
- Red, 5-Pack






