Skip to content
✈️ KOSTENLOSER VERSAND AB 59,99 US$
VORAUSGESCHÄTZTE LIEFERZEIT: 7–14 WERKTAGE

Why Does the Head of My Replacement Eyeglass Screw Stick Out?

14 Nov 2026

Set the glasses down and compare the replacement with the original screw or the opposite side of the frame. Some assemblies use a raised head by design. A head that previously sat lower, now catches on an arm or appears tilted can point to a mismatch at the seat or a screw that has stopped before it seats.

Check the underside of the head

A replacement can match the shaft diameter while the head has a different outline. Look at how the underside sits against the frame. If the head rests on a narrow rim or rocks against the opening, compare its diameter and shape with the original. Photograph both profiles from the side so the difference is visible.

Check usable length and alignment

Compare the shaft under the head, including the threaded portion, with the original and the available depth. A screw can reach the bottom of a hole before the head reaches the seat. If it sits at an angle or starts to bind early, stop turning and check the alignment of the assembled parts. Match the head, thread and length

Check whether the protrusion affects movement

If the screw is in a hinge, watch for contact with the moving arm as you open and close it gently. Stop if anything catches, the screw turns without advancing or the hinge parts no longer align. An optician can check the mount and thread if you cannot identify the original fastener. Troubleshoot a screw that will not tighten

Compare repair tools after confirming the screw fit.

Prev Post
Next Post

Thanks for subscribing!

This email has been registered!

Shop the look

Choose Options

Get practical eyewear tips, compatibility guidance, product updates and occasional subscriber-only offers.

Social

Edit Option
Back In Stock Notification
this is just a warning
Login
Shopping Cart
0 items