How to Photograph Eyeglass Parts for Compatibility Help
Send a full-frame photo, the complete model marking, and close-ups of the mounting point and original part. A photo of the loose part by itself usually leaves out the information needed to tell similar replacements apart.
Take a four-photo set
| Photo | What it should show |
|---|---|
| Whole frame | The front with the temples open and the bridge upright |
| Model marking | The full line inside the temple, including any suffix or size code |
| Mounting point | A straight-on and, if possible, an angled view of the attachment |
| Original part | Both faces of the part alongside a millimeter scale, if it is already loose |
Put the frame on a clean, soft, high-contrast surface. Use side lighting if the code is faint. Tap to focus on the part and hold the camera parallel to the surface you are measuring. Keep the ruler in the same plane so perspective does not make the part look larger or smaller.
Add the detail that matches your repair
Nose pads: Show the back of the intact pad and the holder on the missing side. Include the screw or stem if it is visible.
Temple arms and tips: Show the hinge from both sides and say which side is affected from the wearer’s point of view. For a loose tip, photograph the opening and measure the bare core where the tip sits.
Replacement lenses: Show the frame front and any intact lens edge. If a lens is already out, photograph it flat with its left or right side identified. Leave an intact lens seated if removing it would require force.
Send a short note with the photos
Include the brand, exact model code, which part you need and what changed. An example is “Right nose pad missing. Left pad still installed. The holder appears empty. Ruler is marked in millimeters.” If you are unsure which part failed, describe what you see and attach the untouched side as a reference.
Keep personal details and paperwork out of the images. Send close-ups through EBJDE support, or use the eyeglass repair tools guide to identify the attachment before sending them.
Browse fit and repair guides by the part you are trying to identify.
Productos Destacados
Varillas de repuesto de metal para gafas | EBJDE - Negro
- $9.99
- Unit price
- / per
-
Negro
-
Café
-
Oro
-
Plata
- AzulOro rosaPistola
Almohadillas suaves para patillas de gafas y fundas antideslizantes para varillas | EBJDE - Negro, paquete de 3
- $9.99
$15.99- $9.99
- Unit price
- / per
-
Negro, paquete de 3
-
Rosa, paquete de 3
-
Gris, paquete de 3
-
Morado, paquete de 3
- Azul oscuro, paquete de 3Marrón, paquete de 3Negro / Rosa / Morado, paquete de 2Negro / Marrón / Gris, paquete de 2Negro / Azul / Gris, paquete de 2
Puntas de silicona de 1 mm para patillas de gafas con monturas finas de metal – 5 unidades | EBJDE - Negro, paquete de 5
- $9.99
- Unit price
- / per
-
Negro, paquete de 5
-
Blanco, paquete de 5
-
Marrón, paquete de 5
-
Azul, paquete de 5
- Rojo, paquete de 5Morado, paquete de 5
Almohadillas Nasales de Repuesto de Silicona a Presión Compatibles con Gafas Nike | EBJDE - Negro, 5 pares
- $9.99
- Unit price
- / per
-
Negro, 5 pares
-
Gris, 5 pares
-
Blanco, 5 pares
Fundas largas de silicona para puntas de patillas para monturas finas de metal - Negro
- $9.98
- Unit price
- / per
-
Negro
-
Blanco
-
Rosa
-
Gris
- Morado claroAzul celesteBlanco hueso
Puntas de silicona de 2 × 1 mm para patillas de gafas finas de metal, paquete de 5 | EBJDE - Negro, paquete de 5
- $9.99
- Unit price
- / per
-
Negro, paquete de 5
-
Blanco, paquete de 5
-
Azul, paquete de 5
-
Marrón, paquete de 5
- Rojo, paquete de 5






