How to Pack Glasses in a Case With the Strap Still Attached
Fit the glasses and their attached strap together before choosing a case. The folded frame may fit on its own while a sleeve, slider or coiled cord presses against a lens once the lid closes. Set the strap beside the frame, where its hardware can stay clear of the lenses and hinges.
Measure the complete setup
Fold both arms normally. Measure the widest point of the frame with its connectors attached, then measure the height at the overlap between the arms. Lay the cord next to the frame as you would pack it and check the added width. A slider or bulky foam body may need more space than the folded glasses.
Compare those measurements with the usable interior, including the depth near the closure and the width at each end. Rounded corners and a thick lining can reduce the space inside a case. See the eyeglass case size guide
Load the case and check where the cord can move
Lay the cord in a loose loop alongside the folded temples. Keep hard adjusters away from the lenses and lay any tail clear of the zipper or snap. Close the lid gently and reopen it to see whether the cord moved toward the lens or over the rim. If the lid needs pressure to close or the strap repeatedly crosses the lenses, use the case for the frame alone and store the retainer separately.
Pack damp straps separately
After a workout or a day on the water, dry the retainer and eyewear before shutting them in a case. Before packing a floating strap, check whether its body takes up most of the available space and whether its connectors are designed to be removed. A different case or a separate strap pocket can make packing easier. See how to clean and dry a glasses retainer
Productos Destacados
Varillas de repuesto de metal para gafas | EBJDE - Negro
- $9.99
- Unit price
- / per
-
Negro
-
Café
-
Oro
-
Plata
- AzulOro rosaPistola
Almohadillas suaves para patillas de gafas y fundas antideslizantes para varillas | EBJDE - Negro, paquete de 3
- $9.99
$15.99- $9.99
- Unit price
- / per
-
Negro, paquete de 3
-
Rosa, paquete de 3
-
Gris, paquete de 3
-
Morado, paquete de 3
- Azul oscuro, paquete de 3Marrón, paquete de 3Negro / Rosa / Morado, paquete de 2Negro / Marrón / Gris, paquete de 2Negro / Azul / Gris, paquete de 2
Puntas de silicona de 1 mm para patillas de gafas con monturas finas de metal – 5 unidades | EBJDE - Negro, paquete de 5
- $9.99
- Unit price
- / per
-
Negro, paquete de 5
-
Blanco, paquete de 5
-
Marrón, paquete de 5
-
Azul, paquete de 5
- Rojo, paquete de 5Morado, paquete de 5
Almohadillas Nasales de Repuesto de Silicona a Presión Compatibles con Gafas Nike | EBJDE - Negro, 5 pares
- $9.99
- Unit price
- / per
-
Negro, 5 pares
-
Gris, 5 pares
-
Blanco, 5 pares
Fundas largas de silicona para puntas de patillas para monturas finas de metal - Negro
- $9.98
- Unit price
- / per
-
Negro
-
Blanco
-
Rosa
-
Gris
- Morado claroAzul celesteBlanco hueso
Puntas de silicona de 2 × 1 mm para patillas de gafas finas de metal, paquete de 5 | EBJDE - Negro, paquete de 5
- $9.99
- Unit price
- / per
-
Negro, paquete de 5
-
Blanco, paquete de 5
-
Azul, paquete de 5
-
Marrón, paquete de 5
- Rojo, paquete de 5






