Glasses Won’t Fold After Adding Temple Sleeves? Check These Three Spots
If the glasses folded normally before you added sleeves, find the first point of contact while closing each temple slowly over a clean, padded surface. Stop when you feel resistance. The front edge of a sleeve can catch a hinge, and its thicker rear section can catch the other temple or the case.
1. The sleeve touches the hinge
Open the glasses and look along the inside of the arm. If the sleeve starts close to the hinge, watch its front edge as you begin to fold the arm. When it brushes the hinge or the frame front, check whether the sleeve can sit farther back and still stay secure over the intended contact area. A shorter sleeve may fit when moving the current one leaves it bunched or loose.
2. The two arms touch before they settle
Try the same folding order you used before adding sleeves. Fold the first arm gently and watch where the second would overlap it. A wider sleeve can raise the crossover point. If one sleeve twists, check whether its inner shape matches the temple at that spot. Compare the sleeve length, outer bulk and opening shape before choosing a replacement. How to measure temple end tips
3. The glasses fold but the case presses on them
Put the folded pair in the open case and check the tallest point where the temples overlap. If that point reaches the lid or zipper, compare the sleeve setup with the usable case depth. A deeper case may solve a storage problem when the frame itself folds freely. Measure a case for thick frames
Remove the sleeves and check the bare frame if you are unsure where the problem starts. If the hinge still catches or looks bent with the sleeves removed, an optician can inspect the frame. If the glasses only need cushioning near the ears, compare the contact area with the options in the eyeglass ear cushion fit guide.
Empfohlene Brillenaccessoires
Metall-Ersatzbügel für Brillen | EBJDE
- $9.99
- Unit price
- / per
Weiche Brillenohrpolster & rutschfeste Bügelschoner | EBJDE
- $9.99
$15.99- $9.99
- Unit price
- / per
1-mm-Silikon-Endkappen für Brillengestelle mit dünnen Metallbügeln – 5 Stück | EBJDE
- $9.99
- Unit price
- / per
Silikon-Einsteck-Ersatznasenpads, kompatibel mit Nike-Brillen | EBJDE
- $9.99
- Unit price
- / per
Lange Silikon-Bügelschaftabdeckungen für dünne Metallfassungen
- $9.98
- Unit price
- / per
2×1 mm Silikon-Bügelfinals für dünne Metallbrillen, 5er-Pack | EBJDE
- $9.99
- Unit price
- / per







